The Wrap MK is made of PVC, this material is made to be durable and resistant to heat, scratches and humidity.  Wrap MK comes with a 5 year warranty against discoloration and a 5 year warranty against peeling when installed by one of our certified professionals.

Absolutely, there is no minimum quantity to order.  Simply communicate with us via telephone or email, we will gladly help you with any specific needs you may have.

Wrap MK comes in 48 inches wide roll.  The wood finishes come with the pattern throughout the length of the roll.

First, we suggest you order the sample booklet at a cost of $20+tax (shipping included).  With the samples in hand, it will be easier to access color choice with your surroundings and see the various options available.  Please note that the $20 is refundable on any project of $500 or more. 

It is also possible to order the test kit for two doors ($ 50 + taxes). You will be able to compare two colors and test your ability to DIY.

Presently, we have a complete showroom in Dania Beach with different kitchen styles and multiple cabinets covered in our available colors.  The showroom is located at the following address:

1249 Stirling Road, Suite 9

Dania Beach FL 33004

When you receive the Wrap MK box, the following will be included:

• ample material for your project (doors, cabinets, kick plates, etc);
• edgebanding for contouring;
• tools necessary for installation:  precision cutter, scissors, felt squeegee and the instruction manual.

The only additional tools you will need are a screwdriver for removing kitchen cabinet doors as well as handles and a measuring tape.  We suggest you use a degreaser to clean the surfaces prior to installation

The Wrap MK product has been created specifically to avoid this problem.  The adhesive side of the material has a patented grid that serves as channels to evacuate the air, it then becomes easy to remove the air bubbles with a simple touch.  In addition, the use of the felt will burst all the micro-beads of glue which guarantees maximum adhesion.

Our product is designed for smooth surfaces that are not too damaged, without too many imperfections. However, all melamine edgebanding must be in place around the cabinets. You can replace them as needed.

The matte colors reduce imperfections. The wood finish and the textured are the most effective in these situations. The least effective are the glossy finishes.

If somes of the surfaces have been inflated by water, they will require light sanding before the installation of our Wrap MK. If the surface is too damaged, you may need to replace it completely.

Yes, Wrap MK is designed with moisture-resistant technology.  Just make sure that the surface is not damp at the time of application and be assured that the product will adhere.

Yes, Wrap MK will adhere to the paint.  Although painted melamine leaves a certain relief, a matte color or wood finish is advised.

A two person job,  plan 6-10 hours depending on the layout of your kitchen.

On a drywall that has never been painted, it is necessary to apply a coat of primer so that the Wrap MK adheres well. On an MDF wall, the surface should be smooth and it is important to make sure to clean the surface if it contains traces of wood dust.

Yes, and the result is impressive.  The wrap is available in 30 colors, including various metal finishes that strongly resemble household appliances made of stainless steel.  We have also recently developed two new colors to match the new dark stainless colors appliances “Black Stainless” and “Gunpowder”.

No, the MK Wrap is designed to cover flat surfaces, no embossing or moldings.  However, the wood grain pattern of the melamine cabinet is not a problem.  Know that we can now manufacture doors for approximately $50 each in South Florida area.The doors, cabinets and kick plates are then covered with the Wrap MK color of your choice.

The Wrap MK is designed to last for many years.  The secret to a proper adhesion is to thoroughly clean the surfaces to remove any dirt or grease. Then, simply make sure that the application is done with the help of the felt that will be provided.

You can clean the new surfaces with regular cleaning household products available on the market. It is not recommended to use bleaching products.

Yes, the Wrap MK can be removed from the surface with a little time.  The glue is designed to stay on the back of the material and you will find your original surface without any residue and in good condition.

Our Wrap MK has been specially patented with high quality and highly evolved material.  Dura & Smart Wrap technology is a durable, high-end PVC sticker that is resistant to various sources such as moisture and scratches.

We are very concerned about technological advances and our customers requests. We are currently working on a program to provide a system to better meet the needs of our clients.

We have several consulting specialists and a designer who can advise and assist you for free. We invite you to look at the different projects we have done under the Achievements tab. You can also see great before/after photos on our Facebook Wrap my Kitchen page.

Wrap MK is made of PVC, a durable and scratch resistant material.